PostgreSQL: Documentation: 13: 9.22. Window Functions

Documentation → PostgreSQL 13

Supported Versions: Current (17) / 16 / 15 / 14 / 13

Development Versions: devel

Unsupported versions: 12 / 11 / 10 / 9.6 / 9.5 / 9.4 / 9.3 / 9.2 / 9.1 / 9.0 / 8.4

9.22. Window Functions
Prev	Up	Chapter 9. Functions and Operators	Home	Next

9.22. Window Functions

Window functions provide the ability to perform calculations across sets of rows that are related to the current query row. See Section 3.5 for an introduction to this feature, and Section 4.2.8 for syntax details.

The built-in window functions are listed in Table 9.60. Note that these functions must be invoked using window function syntax, i.e., an OVER clause is required.

In addition to these functions, any built-in or user-defined ordinary aggregate (i.e., not ordered-set or hypothetical-set aggregates) can be used as a window function; see Section 9.21 for a list of the built-in aggregates. Aggregate functions act as window functions only when an OVER clause follows the call; otherwise they act as plain aggregates and return a single row for the entire set.

Table 9.60. General-Purpose Window Functions

Function Description
`row_number` () → `bigint` Returns the number of the current row within its partition, counting from 1.
`rank` () → `bigint` Returns the rank of the current row, with gaps; that is, the `row_number` of the first row in its peer group.
`dense_rank` () → `bigint` Returns the rank of the current row, without gaps; this function effectively counts peer groups.
`percent_rank` () → `double precision` Returns the relative rank of the current row, that is (`rank` - 1) / (total partition rows - 1). The value thus ranges from 0 to 1 inclusive.
`cume_dist` () → `double precision` Returns the cumulative distribution, that is (number of partition rows preceding or peers with current row) / (total partition rows). The value thus ranges from 1/`N` to 1.
`ntile` ( `num_buckets` `integer` ) → `integer` Returns an integer ranging from 1 to the argument value, dividing the partition as equally as possible.
`lag` ( `value` `anyelement` [, `offset` `integer` [, `default` `anyelement` ]] ) → `anyelement` Returns `value` evaluated at the row that is `offset` rows before the current row within the partition; if there is no such row, instead returns `default` (which must be of the same type as `value`). Both `offset` and `default` are evaluated with respect to the current row. If omitted, `offset` defaults to 1 and `default` to `NULL`.
`lead` ( `value` `anyelement` [, `offset` `integer` [, `default` `anyelement` ]] ) → `anyelement` Returns `value` evaluated at the row that is `offset` rows after the current row within the partition; if there is no such row, instead returns `default` (which must be of the same type as `value`). Both `offset` and `default` are evaluated with respect to the current row. If omitted, `offset` defaults to 1 and `default` to `NULL`.
`first_value` ( `value` `anyelement` ) → `anyelement` Returns `value` evaluated at the row that is the first row of the window frame.
`last_value` ( `value` `anyelement` ) → `anyelement` Returns `value` evaluated at the row that is the last row of the window frame.
`nth_value` ( `value` `anyelement`, `n` `integer` ) → `anyelement` Returns `value` evaluated at the row that is the `n`'th row of the window frame (counting from 1); returns `NULL` if there is no such row.

Function

Description

row_number () → bigint

Returns the number of the current row within its partition, counting from 1.

rank () → bigint

Returns the rank of the current row, with gaps; that is, the row_number of the first row in its peer group.

dense_rank () → bigint

Returns the rank of the current row, without gaps; this function effectively counts peer groups.

percent_rank () → double precision

Returns the relative rank of the current row, that is (rank - 1) / (total partition rows - 1). The value thus ranges from 0 to 1 inclusive.

cume_dist () → double precision

Returns the cumulative distribution, that is (number of partition rows preceding or peers with current row) / (total partition rows). The value thus ranges from 1/N to 1.

ntile ( num_buckets integer ) → integer

Returns an integer ranging from 1 to the argument value, dividing the partition as equally as possible.

lag ( value anyelement [, offset integer [, default anyelement ]] ) → anyelement

Returns value evaluated at the row that is offset rows before the current row within the partition; if there is no such row, instead returns default (which must be of the same type as value). Both offset and default are evaluated with respect to the current row. If omitted, offset defaults to 1 and default to NULL.

lead ( value anyelement [, offset integer [, default anyelement ]] ) → anyelement

Returns value evaluated at the row that is offset rows after the current row within the partition; if there is no such row, instead returns default (which must be of the same type as value). Both offset and default are evaluated with respect to the current row. If omitted, offset defaults to 1 and default to NULL.

first_value ( value anyelement ) → anyelement

Returns value evaluated at the row that is the first row of the window frame.

last_value ( value anyelement ) → anyelement

Returns value evaluated at the row that is the last row of the window frame.

nth_value ( value anyelement, n integer ) → anyelement

Returns value evaluated at the row that is the n'th row of the window frame (counting from 1); returns NULL if there is no such row.

All of the functions listed in Table 9.60 depend on the sort ordering specified by the ORDER BY clause of the associated window definition. Rows that are not distinct when considering only the ORDER BY columns are said to be peers. The four ranking functions (including cume_dist) are defined so that they give the same answer for all rows of a peer group.

Note that first_value, last_value, and nth_value consider only the rows within the “window frame”, which by default contains the rows from the start of the partition through the last peer of the current row. This is likely to give unhelpful results for last_value and sometimes also nth_value. You can redefine the frame by adding a suitable frame specification (RANGE, ROWS or GROUPS) to the OVER clause. See Section 4.2.8 for more information about frame specifications.

When an aggregate function is used as a window function, it aggregates over the rows within the current row's window frame. An aggregate used with ORDER BY and the default window frame definition produces a “running sum” type of behavior, which may or may not be what's wanted. To obtain aggregation over the whole partition, omit ORDER BY or use ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING. Other frame specifications can be used to obtain other effects.

Note

The SQL standard defines a RESPECT NULLS or IGNORE NULLS option for lead, lag, first_value, last_value, and nth_value. This is not implemented in PostgreSQL: the behavior is always the same as the standard's default, namely RESPECT NULLS. Likewise, the standard's FROM FIRST or FROM LAST option for nth_value is not implemented: only the default FROM FIRST behavior is supported. (You can achieve the result of FROM LAST by reversing the ORDER BY ordering.)

Prev	Up	Next
9.21. Aggregate Functions	Home	9.23. Subquery Expressions

Submit correction

If you see anything in the documentation that is not correct, does not match your experience with the particular feature or requires further clarification, please use this form to report a documentation issue.